Activating Manage MyMachines /Spindle Monitor
You can display information and recorded operating conditions from the SMI24 Sensor Module of a spindle. The SMI24 is available as an option for a large number of Weiss spindles. After being tested, the spindles of other manufacturers can be converted to SMI24.
More information can be found in the following Chapters:
Precondition
-
You have purchased Manage MyMachines for Industrial Operations X Cloud.
-
For Manage MyMachines for Industrial Operations X Cloud "Manage MyMachines", option button "12 months enablement (charged annually upfront)" is activated under "Charging Model".
-
The Weiss spindle is equipped with an SMI24 module.
Procedure
-
In the launch pad, click on Manage MyMachines for Industrial Operations X Cloud "Shopfloor Management App".
Window "Shopfloor Management Application" > "Shopfloor" > tab "Application" > "Manage MyMachines" opens.
-
Select the required asset in the left-hand part of the window.
To filter this asset, enter a character string in text box "Search".
Set the slider to the right to activate the use of "Manage MyMachines /Spindle Monitor" for this asset.A pop-up "confirmation" opens.
-
Click on link "Product Sheet and Specific Terms for Manage MyMachines" and read through the information.
-
Activate the "I confirm that I am authorized to activate the upgrade at the fees and terms and conditions set out in the Product Sheet and Specific Terms for Manage MyMachines /Spindle Monitor." check box.
-
Click on "Next".
- OR -
Click on "Cancel" to cancel the operation.The window with message "Measured values and information from the additional main spindle device SMI24 are shown and stored." opens.
-
Click "OK" to confirm and to save the displayed values.
You receive confirmation that the configuration has been saved successfully.
-
Click on "OK" to close the message.
Manage MyMachines /Spindle-Monitor Product Sheet and Specific Terms
If you click on the link "Product Sheet and Specific Terms for Manage MyMachines /Spindle Monitor", the document will be downloaded.
You obtain information about the product:
-
Preconditions
-
A brief product description
-
Cost model
-
Special Terms & Conditions
-
Export control regulations
-
Safety information
-
Explanation of terms