Results
Analysis of the clamping system
The following analysis data is displayed for the Weiss spindle.
|
Display |
Description |
|
|---|---|---|
|
Reference Clamping Time |
Shows the values of the first 100 clamping procedures that were measured during the commissioning phase of the spindle by the SMI24. |
|
|
Minimum |
The shortest determined reference clamping time from the first to the last measured time, with a maximum of 100. Clamping
procedure: |
|
|
Average |
The average, determined reference clamping time from the first to the last measured, with a maximum of 100. Clamping procedure: |
|
|
Maximum |
The longest determined reference clamping time from the first to the last measured, with a maximum of 100. Clamping procedure: |
|
|
Trend Clamping Time |
Shows the values that were measured in the corresponding time periods by the SMI24. |
|
|
Latest |
The last determined reference clamping time |
|
|
Average Of The Last 24 Hours |
The average reference clamping time determined over the last 24 hours from the clamping procedures that took place during
that time: |
|
|
Average Of The Last 240 Hours |
The average reference clamping time determined over the last 240 hours from the clamping procedures that took place during that time: Clamping state "Released" → "Clamped with tool" |
|
|
Average Of The Last 2400 Hours |
The average reference clamping time determined over the last 2400 hours from the clamping procedures that took place during that time: Clamping state "Released" → "Clamped with tool" |
|
|
Number Clamping Operations Tolerance |
Shows the time within a clamping procedure between the clamping state "Tool released" and "Clamped without tool" |
|
|
Number of clamping cycles within the clamping time tolerance |
Accumulated number of clamping cycles without tool, which were within the clamping time tolerance |
|
|
Number of clamping cycles outside the clamping time tolerance |
Accumulated number of clamping cycles without tool, which were outside the clamping time tolerance |
|
|
Reference clamping time (without tool) |
Factory specification of the time for the clamping operation without tool |
|
|
Actual clamping time (without tool) |
Measured time for the last performed clamping operation without tool |
|
