Creating identSNAPSHOT file on SINUMERIK controller
Procedure
1. |
Open SINUMERIK Operate and select the "Diagnostics" operating area. |
|||
2. |
Press the "Version" softkey. |
|||
3. |
Press the "Save" softkey. The "Save version information: Select Archive" window opens. The following storage locations are offered depending on the configuration:
|
|||
4. |
Then press the "New directory" softkey if you wish to create your own directory. |
|||
5. |
Press the "OK" softkey. The directory is created. |
|||
6. |
Press the "OK" softkey again to confirm the storage location. The "Save version information: Name" window opens. |
|||
7. |
Specify the desired settings. |
|||
|
||||
|
||||
8. |
Press the "OK" softkey to start the data transfer. |
Stadard paths for identSNAPSHOT file on NCU/PCU
|
|
|
|
Result
After the process is completed, the identSNAPSHOT file should appear under the path "/user/sinumerik/hmi/data/version".
The standard paths for