Results
- SINUMERIK Service Assistance
- Introduction
- Safety notes
- Product overview
- Machine Configuration in MindSphere
- Aspect configuration for SSA with MMM
- Aspect configuration for SSA with BFC Gateway
- Module description
- Troubleshooting
- Appendix
- Glossary
- Introduction
- Safety notes
- Product overview
- Machine Configuration in MindSphere
- Aspect configuration for SSA with MMM
- Aspect configuration for SSA with BFC Gateway
- Module description
- Troubleshooting
- Appendix
- Glossary
Overview
All the information in the service Machine Transparency is generated from a single xml file of the controller, called identSNAPSHOT. This file is imported into the app SINUMERIK Service Assistance after creating the identSNAPSHOT file manually on the controller.
Creating and uploading the identSNAPSHOT file is described in this chapter. Furthermore limitations on file upload are listed.
Chap. 5.2.1
NOTE
The identSNAPSHOT file needs to be created manually with the instructions below every time there is a change (software or/and hardware) on the machine.