Results
- SINUMERIK Service Assistance
- Introduction
- Safety notes
- Product overview
- Machine Configuration in MindSphere
- Aspect configuration for SSA with MMM
- Aspect configuration for SSA with BFC Gateway
- Module description
- Troubleshooting
- Appendix
- Glossary
- Introduction
- Safety notes
- Product overview
- Machine Configuration in MindSphere
- Aspect configuration for SSA with MMM
- Aspect configuration for SSA with BFC Gateway
- Module description
- Troubleshooting
- Appendix
- Glossary
Overview
The overview page for Machine Error Analysis service shows all clusters for this service. Each cluster shows a summary information for the subservice. By clicking on a specific cluster the page of this service will open.
The following values are shown for each cluster:
-
Current Alarms:
-
Number of current alarms
-
thereof with high priority
-
-
Alarm History:
-
Number of alarms within 8 hours
-
Number of alarms within last day
-
Number of alarms within last 7 days
-
-
Triggering Alarms for Disturbances:
-
Triggering Disturbances within 7 days
-
Alarm reaction / NC Stop within 7 days
-
Chap. 5.6.2.1
NOTE
Please consider the following restrictions, in order to work with Machine Error Analysis with high quality:
There should be max 10 current alarms.
There should be max 1000 alarms in alarm history.