Analyze MyPerformance /OEE, Analyze MyPerformance /OEE Pro

Configuring variables

Using this function, you can individually configure which data is sent from the machine to MindSphere, and how this data is sent. If a specific alarm occurs, for example, you can define that the HMI trace, NC status and machine data are transmitted from the machine to MindSphere.

The MindSphere "Shopfloor Management Application" > "Advanced" tab allows you to individually configure the following variables:

It is also possible to copy all configurations of one asset to another asset.

More information: Copying configurations

Requirement

Save all machine data regularly at the machine, and transmit this information to MindSphere before an error occurs on the machine side.
To send HMI traces to MindSphere, the HMI action log on the machine must be activated for the following data:
- HMI trace
- NCU data
- Machine data

Software option

To use the variable data, you need the "Path length evaluation" software option (6FC5800-0AM53-0YB0).

The variables monitor must be activated to open the "Advanced" tab.
If the application is used with the "Cross‐Tenancy" function, the data and configurations are visible in the tenants, but cannot be changed.
Manage MyMachines is activated for the required asset or the activation date has been defined to be in the future.
More information is provided in Function Manual Manage MyMachines, Manage MyMachines /Spindle Monitor.
For an activation date in the future, the previously set configuration data only become active on the activation date.

Icons

Icons	Description
	Creates a new configuration.
	Copies the configurations of an asset to other assets. More information can be found in this Chapter: Copying configurations When copying, the "Configuration activated" or "Configuration deactivated" setting is also copied.
	Click the down arrow to open the area and to display the associated configurations.
	Click on the up arrow to close the area.
	Set the slider to the right to activate the corresponding configuration. The data for this configuration are recorded and sent to MindSphere. As default setting, each new configuration is activated.
	Set the slider to the left to deactivate the corresponding configuration. The data for this configuration are not recorded and sent to MindSphere.
	Opens a configuration that has already been created in order to make changes.
	Deletes a configuration that has already been created.

Procedure

In the Launchpad, click the "Shopfloor Management App" MindSphere application.
The "Shopfloor Management Application" > "Shopfloor" > window "Application" > "Manage MyMachines" tab opens.
Click on "Analyze MyPerformance" in the right-hand side of the window.
Select the required asset in the central section of the window.
Open the "Advanced" tab in the right-hand section of the window.
The window with the overview of the configurations that have been created opens.
- If you have an incorrect configuration or a configuration that is no longer required, set the slider to the left to deactivate the configuration. The data flow from the machine to MindSphere is stopped, and the associated configuration is no longer displayed in window "Machine aspects". It can take up to 15 seconds until data recording is stopped.
- Set the slider to the right to activate the required configuration.
- To change an existing configuration, click on the "Edit" icon in the corresponding line.
- To delete an existing configuration, click on the "Recycle bin" icon in the appropriate line.
  Confirm the message that the operation cannot be undone.
Click on the "+" button to add a new configuration.
The input window to select the functions opens.

Select one of the following functions:

More information

More information about NC variables is provided in the List Manual:

SINUMERIK 840D sl, NC variables
SINUMERIK 828D, NC variables