Configuring the URL and proxy

The use of SINUMERIK Integrate has been activated.

Check whether the Internet connection is available and activated:

• TCU:
  Press the "Online Services" softkey. The "Login" window is opened.
  If this is not the case, check the connected Internet connection.

• PCU:

  Start the control in service mode, and call up an Internet page using the Web browser, for example, "www.siemens.com".

1. The "Settings" window is open.
   Press the "URLs >" softkey.

2. Press the "Edit" softkey and select the following settings:

   • Directory: Select the "User" entry in the "Directory" drop-down list.

   • Display home page: Select the "Overwrite here" check box.

   • RenderService: Select the "Overwrite here" check box.

   • Web service URL: Select the "Overwrite here" check box.

   • Enter the following Web service URL depending on which MindSphere system you are connected with:
     MindSphere V3 Livesystem
     MindSphere Alibaba

   • Enter the required value in the "Transmit timeout in seconds" input field. The default value is 200. Then select the "Overwrite here" check box.

   • Enter the required value in the "Receive timeout in seconds" input field (default value is 200), and select the "Overwrite here" check box.

     

3. Press the "OK" softkey.
   A syntax check is performed and the access data is saved.

   Usually, the settings are now complete. If further adaptations need be made within your company network, read the following paragraph:

Proxy adaptations (optional)

1. Clarify with your network administrator whether the Proxy settings have to be adjusted for the connection to Cloud mode.
   If this is necessary, proceed as follows:

2. Press the "Proxys >" softkey.
   The stored settings are displayed.

3. Press the "Edit" softkey and select the following settings:

   • Select the "Use fix proxy" check box.

   • Enter your proxies in the "Proxy 1" to "Proxy 3" input fields.

   • Select the "Overwrite here" check box even if you only enter one proxy in order to accept the new entry.

     

4. Press the "OK" softkey to save the settings.

5. If an authentication is required for the proxy, press the "Authorization" softkey.

   • Select the "Overwrite here" check box to accept the new entry.

   • Enter the user data in the "Domain", "User name" and "Password" input fields.

     

6. Press the "OK" softkey to save the settings.

7. Restart the control so that the access data can take effect.

Activate the port for HTTPS communication to ensure secure data transfer between the user server and the control.

1. Press softkey "Commissioning" >" Network" > "Company network".
   The "Company network settings" window opens.

2. To edit the settings, press the "Change" softkey.

3. In the "Firewall exceptions" area, add port "TCP/443" in the "Additional ports" input box.

4. Press the "OK" softkey.