Results
- Analyze MyPerformance /OEE, Analyze MyPerformance /OEE Pro
- Introduction
- Fundamental safety instructions
- System requirements
- Setting up the SINUMERIK control system for Analyze MyPerformance
- Disconnecting the SINUMERIK control system from MindSphere
- Integrating MindSphere
- SINUMERIK Integrate Gateway
- Logging onto/logging out of Analyze MyPerformance
- Working with Analyze MyPerformance /OEE, Analyze MyPerformance /OEE Pro
- Appendix
- Introduction
- Fundamental safety instructions
- System requirements
- Setting up the SINUMERIK control system for Analyze MyPerformance
- Disconnecting the SINUMERIK control system from MindSphere
- Integrating MindSphere
- SINUMERIK Integrate Gateway
- Logging onto/logging out of Analyze MyPerformance
- Working with Analyze MyPerformance /OEE, Analyze MyPerformance /OEE Pro
- Appendix
Activating logs for troubleshooting
At the SINUMERIK control system, activate the logs in the "ePSConfig.user.xml" file for troubleshooting.
Procedure
-
Press the "System data" softkey.
-
Navigate in the following directory: System CF card/user/sinumerik/hmi/cfg.
-
Open file "ePSConfig.user.xml".
-
Make the following setting:
<logging>
<separateScriptLog active="1">1</separateScriptLog>
<scriptLogPath active="1">/var/tmp/scriptLog</scriptLogPath>
<scriptLogSeverity active="1">8</scriptLogSeverity>
<uiScriptLogSeverity active="0">2</uiScriptLogSeverity>
<maxScriptLogSize active="1">10000</maxScriptLogSize>
<maxLogLifeTimeDays active="0">30</maxLogLifeTimeDays>
</logging>
-
Restart the SINUMERIK control system and have the log files sent to you.
Chap. 4.6.2