Results
- Analyze MyPerformance /OEE, Analyze MyPerformance /OEE Pro
- Introduction
- Fundamental safety instructions
- System requirements
- Setting up the SINUMERIK control system for Analyze MyPerformance
- Disconnecting the SINUMERIK control system from MindSphere
- Integrating MindSphere
- SINUMERIK Integrate Gateway
- Logging onto/logging out of Analyze MyPerformance
- Working with Analyze MyPerformance /OEE, Analyze MyPerformance /OEE Pro
- Appendix
- Introduction
- Fundamental safety instructions
- System requirements
- Setting up the SINUMERIK control system for Analyze MyPerformance
- Disconnecting the SINUMERIK control system from MindSphere
- Integrating MindSphere
- SINUMERIK Integrate Gateway
- Logging onto/logging out of Analyze MyPerformance
- Working with Analyze MyPerformance /OEE, Analyze MyPerformance /OEE Pro
- Appendix
Activating the SINUMERIK Integrate client
Procedure
-
Start the SINUMERIK Operate operating software on the control.
-
Press the "Setup" and "Mach. data" softkeys.
-
Press the "Password" softkey.
-
The "Set password" window opens.
-
Enter the password for "Manufacture" and press the "OK" softkey.
-
Press the menu forward key and the "Display MD" softkey.
-
Set the machine data
MD9108 $MM_SINUMERIK_INTEGRATE to "1".
-
-
Press the <MENU SELECT> key followed by the menu forward key.
-
The "SINUMERIK Integrate" softkey is displayed on the extended horizontal softkey bar.
Chap. 4.3.1