Machine overview
When you open the "Manage MyMachines" MindSphere application, the "Machine Overview" window opens and all of the available machines are listed together with the associated data.
Parameter
Description |
|
---|---|
Underlined asset name |
Displays the machine names By clicking on the underscored machine name, the "Machine Dashboard" window opens and additional machine information is displayed. |
Displays the status of the machine:
|
|
|
|
|
|
Status of the remote session |
|
|
|
You can start a new remote session. |
|
You can join an existing remote session. |
|
Machine status |
|
To the left of the machine information, you will see a bar that displays the machine status, color-coded. When passing over with the mouse, a tooltip is displayed showing some information: |
|
|
The machine status is not known. |
|
The operating mode is "AUTO", none of the stop conditions listed below apply, and the following situation exists:
|
|
The machine status displays "Technical Disturbance". The operating mode is "AUTO", and one of the following stop conditions is active:
|
|
The machine status displays "Organizational Disturbance". No other disturbances or conditions occur than are described under "Tech. Disturbance". |
|
The operating mode is not "AUTO". |
Information about the machine |
|
Alarms |
Displays the number of active alarms. Window "Machine alarms" opens if you click on the underlined data. More information is provided in Chapter: Displaying machine alarms. |
HMI-UI type |
Displays the operating software:
|
Location |
Time at the machine location |
NC program |
Displays the NC program |
Tenant ID |
Displays the customer name. |
Opens an additional window:
|
Procedure
-
In the launch pad, click on the "Manage MyMachines MindSphere" icon.
-
The "Machine Overview" window opens and the available machines are displayed.
-
Click on the required machine.
The "Machine Dashboard" window opens and you can view additional data.
More information is provided in Chapter: Dashboard.
NOTE
Machines connected to the SINUMERIK Integrate Gateway interface are displayed as being online. To do this, for at least one aspect of the particular machine, data should be uploaded in a time interval of less than five minutes. If this is not the case, then the machine can appear offline.