Results
- Manage MyMachines, Manage MyMachines /Spindle Monitor
- Introduction
- Fundamental safety instructions
- Setting up the SINUMERIK control system for Manage MyMachines
- Integrating MindSphere
- Logging in to MindSphere
- Icons and buttons in MindSphere
- Managing users
- Asset Manager
- Shopfloor Management Application
- Connecting controller with MindSphere
- Configuring an alarm message and sending by email
- Displaying uploaded files in "Operations Insight"
- Machine agent
- Setting up MindConnect Nano for Manage MyMachines
- SINUMERIK Integrate Gateway
- Working with Manage MyMachines
- Overview
- Selecting a language
- Configuring a machine overview
- Filtering machines
- Machine overview
- Dashboard
- Displaying machine alarms
- Aspects
- Events
- Exporting
- My Dashboards
- Manage MyMachines /Spindle Monitor
- Machine location
- Motor temperature
- Files
- Error analysis
- Using the calendar function
- Remote sessions with Manage MyMachines
- Disconnecting the SINUMERIK control system from MindSphere
- Appendix
- Glossary
- Introduction
- Fundamental safety instructions
- Setting up the SINUMERIK control system for Manage MyMachines
- Integrating MindSphere
- Logging in to MindSphere
- Icons and buttons in MindSphere
- Managing users
- Asset Manager
- Shopfloor Management Application
- Connecting controller with MindSphere
- Configuring an alarm message and sending by email
- Displaying uploaded files in "Operations Insight"
- Machine agent
- Setting up MindConnect Nano for Manage MyMachines
- SINUMERIK Integrate Gateway
- Working with Manage MyMachines
- Overview
- Selecting a language
- Configuring a machine overview
- Filtering machines
- Machine overview
- Dashboard
- Displaying machine alarms
- Aspects
- Events
- Exporting
- My Dashboards
- Manage MyMachines /Spindle Monitor
- Machine location
- Motor temperature
- Files
- Error analysis
- Using the calendar function
- Remote sessions with Manage MyMachines
- Disconnecting the SINUMERIK control system from MindSphere
- Appendix
- Glossary
Activating the SINUMERIK Integrate client
Procedure
-
Start the SINUMERIK Operate operating software on the control.
-
Press the "Setup" and "Mach. data" softkeys.
-
Press the "Password" softkey.
-
The "Set password" window opens.
-
Enter the password for "Manufacture" and press the "OK" softkey.
-
Press the menu forward key and the "Display MD" softkey.
-
Set the machine data
MD9108 $MM_SINUMERIK_INTEGRATE to "1".
-
-
Press the <MENU SELECT> key followed by the menu forward key.
-
The "SINUMERIK Integrate" softkey is displayed on the extended horizontal softkey bar.
Chap. 3.3.1