Activating the data acquisition
Overview
To use the MindSphere application you must perform various steps in MindSphere and on the SINUMERIK control system itself.
Procedure
In MindSphere:
-
Create the desired assets.
Further information can be found at: Asset Manager
Detailed information can be found at: MindSphere - Asset Manager System Manual -
Create the "onboard.key".
Further information can be found at: Connecting the SINUMERIK control system with MindSphere
At the SINUMERIK control system:
-
Check the installed versions.
Further information can be found at: Displaying version data-
If an appropriate SINUMERIK Integrate version is not installed, then perform a client update.
Further information can be found at: Client update under Windows
-
-
Activate the SINUMERIK Integrate client.
Further information can be found at: Activating the SINUMERIK Integrate client -
Enable the use of SINUMERIK Integrate.
Further information can be found at: Activating use of SINUMERIK Integrate -
Configure the URL and proxy.
-
On the SINUMERIK 840D sl control system:
Further information can be found at: Configuring the URL and proxy
- OR -
-
On the SINUMERIK 828D control system:
Further information can be found at: Configuring the URL and proxy
-
-
Restart SINUMERIK Operate.
-
Insert "onboard.key".
-
On the SINUMERIK 840D sl control system:
Further information can be found at: Install the registration key on a SINUMERIK control system
- OR -
-
On the SINUMERIK 828D
Further information can be found at: Install the registration key on a SINUMERIK control system
-
-
Restart SINUMERIK Operate.
NOTE
The file "onboard.key" contains safety-related information for the one-time connection setup of a SINUMERIK controller with MindSphere and must therefore be stored safely - both on the terminal, on which the file is stored temporarily, and on the target controller. Only when the connection between the SINUMERIK control system and MindSphere has been completely set up is this connection setup key no longer relevant.
This file is then automatically deleted on the SINUMERIK control system.
Secure the terminals used for this accordingly, for example, using virus protection programs, firewalls, OS updates, etc.