Results
Activating the SINUMERIK Integrate client
Procedure
-
Start the SINUMERIK Operate operating software on the control.
-
Press the "Setup" and "Mach. data" softkeys.
-
Press the "Password" softkey.
-
The "Set password" window opens.
-
Enter the password for "Manufacture" and press the "OK" softkey.
-
Press the menu forward key and the "Display MD" softkey.
-
Set the machine data
MD9108 $MM_SINUMERIK_INTEGRATE to "1".
-
-
Press the <MENU SELECT> key followed by the menu forward key.
-
The "SINUMERIK Integrate" softkey is displayed on the extended horizontal softkey bar.