Results
Constraints
Invalid measurement results
Description
If measurements are performed on a SINUMERIK control using SINUMERIK Operate Version 4.5.x, invalid measurement results for measurement groups will sporadically occur.
Remedy
No remedy possible.
Loss of input data
Description
If you click on "Back" while setting up a measurement in the browser, the data already entered is lost.
Remedy
No remedy possible.
Changing the machine model
Description
The machine model was changed in SINUMERIK with reference to axis settings or other axis-relevant machine configurations on the SINUMERIK.
Remedy
Restart Analyze MyMachine /Condition.
Several NC programs on the SINUMERIK control
Description
2 NC programs were simultaneously generated on the SINUMERIK Edge network drive. The same measurement is available twice on the SINUMERIK control.
Remedy
Do not allow the NC program to run with a content of 0 byte.
No additional remedy is possible.
Buttons not visible
Description
In rare cases, the buttons in the "Basic Configuration" tab of the "Configure Measurement" window are not visible because they are covered by the footer.
Remedy
Press the <CTRL> + <F5> keys. The window is reloaded.
Notice: All changes have to be entered again.
Automatic update of the "Traffic light view"
Description
After installing or restarting the system, the automatic update of the "Traffic light view" does not function.
Remedy
Delete the data from your browser cache.
The user interface does not respond
Description
The user interface of Analyze MyMachine /Condition does not respond as the application has crashed.
Remedy
-
Open the MindSphere application Manage MySINUMERIK Edge App Management.
-
Restart Analyze MyMachine /Condition.