Connecting the SINUMERIK control system with MindSphere
The activation of SINUMERIK Integrate, the setting up of the URL/proxy and the restart creates the "boot_job" folder in the /var/tmp/ directory. If the directory is not set up, create it manually.
There are two ways to copy the "onboard.key" to the SINUMERIK control:
-
Via the user interface of the operating software
-
With the aid of WinSCP
Requirement
The onboard key has been generated
The "boot_job" folder is created on the control at one of the following paths:
-
Linux (SINUMERIK 840/828): /var/tmp/boot_job
-
Win7 PCU 50: C:\temp\boot_job
-
WinXP PCU 50: F:\tmp\boot_job
Procedure
-
Start the operating software on the control in service mode.
-
Insert the USB flash drive with the "onboard.key" file into the PCU.
The USB flash drive is shown in the directory tree. -
Copy the "onboard.key" file, for example, to the following directory: C:\temp\boot_job.
-
After connection, the "onboard.key" file is deleted and the "cert.key" file is created.
In the Manage MyMachine Dashboard, the SINUMERIK control (machine) is shown online.