Results
System requirements
Hardware and operating software
SINUMERIK 840D sl
|
SINUMERIK Integrate |
Operating software SINUMERIK Operate Version |
Hardware version |
Operating system |
|---|---|---|---|
|
2.0.11 2.0.12 2.0.13 2.0.14 |
4.5 SP4, HF 1, 2, 3 4.5 SP5, HF 1, 3, 5 4.5 SP6, HF 3, 5, 7, 8, 10, 11, 13 14, 15, 16, 17, 18 |
NCU 730.3 PN |
Linux |
|
PCU 50.5 |
Windows 7 |
||
|
4.5 SP4, HF 4 4.5 SP6, HF 1, 12 |
NCU 730.3 PN |
Linux |
|
|
4.5 SP6, HF 2 |
PCU 50.5 |
Windows 7 |
|
|
3.0.11 3.0.12 3.0.13 3.0.14 |
4.7 SP2, HF 1, 3, 4 4.7 SP3, HF 1, 2, 3, 4 4.7 SP4, HF 1, 4, 6 4.7 SP5, HF 1 4.7 SP6, HF 1, 3, 4, 5, 6, 7 4.7 SP7, HF 1, 3, 4 4.8 SP1, HF 1, 2, 3 4.8 SP2, HF 1, 3 4.8 SP3, HF 1 4.8 SP4, HF 1, 3, 4, 6, 8 4.8 SP5, HF 2, 3, 4 |
NCU 730.3 PN |
Linux |
|
PCU 50.5 |
Windows 7 |
||
|
4.7 SP4, HF 3, 5 4.7 SP7, HF 2 |
NCU 730.3 PN |
Linux |
|
|
4.7 SP7, HF 5 |
PCU 50.5 |
Windows 7 |
|
|
4.0.0 4.0.1 |
4.91 HF 1 4.92 HF 2, 3 |
NCU 730.3 PN |
Linux |
|
PCU 50.5 |
Windows 7 |
SINUMERIK 828D
|
SINUMERIK Integrate |
Operating software SINUMERIK Operate Version |
Hardware version |
Operating system |
|---|---|---|---|
|
2.0.11 2.0.12 2.0.13 2.0.14 |
4.5 SP4 4.5 SP5, HF 1, 2 4.5 SP6, HF 1, 2, 3, 4 |
PPU 281.3 PPU 261.3 PPU 241.4 |
Linux |
|
3.0.11 3.0.12 3.0.13 3.0.14 |
4.7 SP2, HF1 4.7 SP3, HF1 4.7 SP4, HF1, 2 4.7 SP5 4.7 SP6, HF1, 2 4.7 SP7 HF1, 3 |
||
|
3.0.11 3.0.12 3.0.13 3.0.14 |
4.8 SP4, HF 1, 2, 3 4.8 SP5, HF 3 |
PPU 271.4 |
Linux |
Operating PC
|
Processor |
1 GHz processor |
|
RAM (GB) |
4 |
|
Free hard disk capacity (GB) |
1 |
|
Operating systems |
Windows 7 SP1 (x64) Professional/Enterprise/Ultimate Windows 10 (x64) Pro/Enterprise |
|
Screen resolution |
At least 1980 x 1080 pixels |
Web browser
You can use the following web browsers:
-
Chrome
Version from 65.0.3325.18 (64 bit) up to the current version -
Firefox
Version 59.0.2 (64 bit) up to the current version -
Safari for tablets
iOS and Android systems are supported for the current version and 10 inch tablet size
Security notes
NOTICE
The connection of SINUMERIK controls to MindSphere via TLS 1.2 /https meets the highest security standards.
SINUMERIK versions that do not meet these standards are not part of the product. For these versions, additional security measures must be taken.
You are solely responsible for preventing unauthorized access to your plants, systems, machines and network. Systems, machines and components should only be connected to the company's network or the Internet if and to the extent necessary and with appropriate security measures (e.g. use of firewalls and network segmentation) in place.
The actions required in this regard are described in the following Configuration Manual: Industrial Security.
NOTICE
An unrestricted Internet connection can lead to data misuse, e.g. when transferring the asset data.
Before establishing a network connection, ensure your PC is exclusively connected to the Internet via a secure connection. Pay attention to the security-relevant notes.
Further information about communications security can be found in the Configuration Manual: Industrial Security.
NOTE
The necessary security measures (e.g. virus scanner, firewalls, operating system patching, etc.) must be implemented on the SINUMERIK controls.
Further information about communications security can be found in the Configuration Manual: Industrial Security.
NOTE
The necessary security measures (e.g. virus scanner, firewalls, operating system patching, etc.) must be implemented on the PCs that are used to visualize and configure MindSphere applications at the OEM or end customer facility.
Further information about PCs in the industrial environment can be found in the Configuration Manual: Industrial Security.
Delivery form
The updates and further information on the applications and products are stored on PridaNet and can be downloaded directly from there.
- OR -
You can contact your machine manufacturer.
- OR -
You contact Siemens Service and Support.
NOTE
Parallel operation with SINUMERIK Integrate applications is not possible