Skip to content

Entering Manual OEE Data

Description

In case not all data can be collected automatically for OEE analysis the "Enter Manual Data" functionality can be used. This functionality provides an interface to enter data that is needed for OEE calculations based on the OEE configuration.

All entered data will be used for calculation of underlying OEE KPIs.

Procedure

  1. Display an automatically generated OEE dashboard.
  2. Click "Enter Data" above the Gantt chart for the machine status.
    enter-oee-dashboard
  3. A table view of all available parameters is shown and new rows can be added.
    oee-table
    By giving a timestamp and the resulting parameters a row can be added. Values can be changed afterwards as well. Timestamps are unique and not be given twice. Rows can be deleted at any point in time.
  4. After finishing the data entering processing click Save. All entered data will be used for OEE calculation.
    oee-table-full

Available parameters

Only parameters that are configured as variables will be shown in the table for manual data collection. KPIs and static values can not be overriden. In case entering of those parameters is needed a variable needs to be connected in the OEE settings.