Results

MindConnect Hardware Release Notes

General

  • Firmware version: V03.03.00.03 is available.

  • MindSphere provides a highly reliable system, however the MindConnect can be affected by system internal incidents.

  • The MindConnect system send data into the MindSphere. If the data provider (e.g. OPC server) is not available. A value "0" with a bad quality code will be sent up. To see the quality code in the IoT model it's necessary that the quality code is always turned on at the creation of aspects.

  • We recommend to use an OPC UA server as data source with a certificate.

MindConnect Nano

Fixed issues

  • Reading data of variable type "double" via MODBUS protocol (TCP and RTU) is now possible.

  • All possible Modbus RTU read baud rates can be used.

Known issues

  • The usage of more than 30 data sources (MindConnect Nano) is not recommended.

  • The connection to a SIMOCODE, SIMOTION, SINAMICS OPC UA Server cannot reestablish automatic if the used Firmware has a MiniWeb version <V5.1. It's recommended to upgrade to a new FW version of the SIMOCODE, SIMOTION, SINAMICS device.

  • If the version V03.02.00.00 b003 should be upgraded to the latest version, and the automatic firmware update does not work, please use the manual update option. This can happen if you use a proxy with fixed credentials.

  • If the Modbus adapter have issues in reading data from Modbus devices the MindConnect LED will not show a yellow light.

MindConnect IoT2040

Fixed issues

  • Reading data of variable type "double" via MODBUS protocol (TCP and RTU) is now possible.

  • All possible Modbus RTU read baud rates can be used.

Known issues

  • The usage of more than 5 datasources (MindConnect IOT2040) is not recommended.

  • The connection to a SIMOCODE, SIMOTION, SINAMICS OPC UA Server cannot reestablish automatic if the used Firmware has a MiniWeb version <V5.1. It's recommended to upgrade to a new FW version of the SIMOCODE, SIMOTION, SINAMICS device.

  • If the version V03.02.00.00 b003 should be upgraded to the latest version, and the automatic firmware update can fail, please use the manual update option. This can happen if you use a proxy with fixed credentials.

  • If the Modbus adapter have issues in reading data from Modbus devices the MindConnect LED will not show a yellow light.

Chap. 4.1.2