System requirements

Hardware and operating software

SINUMERIK 840D sl

SINUMERIK Integrate
Client Software Version

Operating software

SINUMERIK Operate Version

Hardware version

Operating system

02.00.00.11

02.00.00.12

4.5 SP4, HF 1, 2, 3, 4,

4.5 SP5, HF 1, 3, 5

4.5 SP6, HF 3, 5, 7, 8, 10, 11, 13 14, 15

NCU 730.3 PN

Linux

PCU 50.5

Windows 7

4.5 SP6 HF 1, 12

NCU 730.3 PN

Linux

4.5 SP6 HF 2

PCU 50.5

Windows 7

03.00.00.11

03.00.00.12

4.7 SP2 HF 1, 3, 4

4.7 SP3, HF 1, 2, 3, 4

4.7 SP4, HF 1, 4, 6

4.7 SP5, HF 1

4.7 SP6, HF 1, 3, 4, 5

4.8 SP1, HF 1, 2, 3

4.8 SP2, HF 1, 3

4.8 SP3, HF 1

NCU 730.3 PN

Linux

PCU 50.5

Windows 7

4.7 SP4 HF 3, 5

NCU 730.3 PN

Linux

SINUMERIK 828D

SINUMERIK Integrate
Client Software Version

Operating software

SINUMERIK Operate Version

Hardware version

Operating system

02.00.00.11

02.00.00.12

4.5 SP4

4.5 SP5, HF 1, 2

4.5 SP6, HF 1, 2, 3, 4

PPU 281.3

PPU 241.3

Linux

03.00.00.11

03.00.00.12

4.7 SP2, HF1

4.7 SP3, HF1

4.7 SP4, HF1, 2

4.7 SP5

4.7 SP6, HF1

Operating PC

Processor

1 GHz processor

RAM (GB)

4

Free hard disk capacity (GB)

1

Operating systems

Windows 7 SP1 (x64) Professional/Enterprise/Ultimate

Windows 10 (x64) Pro/Enterprise

Screen resolution

At least 1980 x 1080 pixels

Web browser

You can use the following web browsers:

  • Chrome
    Version from 68.0.3440.84 (32 bit) up to the current version

  • Firefox
    Version 59.9.0 (32 bit) up to the current version

  • Safari for tablets
    iOS and Android systems are supported for the current version and 10 inch tablet size

Safety instructions

NOTE

Connecting SINUMERIK control systems to MindSphere

Connecting SINUMERIK control systems to MindSphere via TLS 1.2/https complies with the highest security standards.

SINUMERIK versions that do not meet these standards are not part of the product. For these versions, additional security measures must be taken.

You are solely responsible for preventing unauthorized access to your plants, systems, SINUMERIK control systems and the network. Systems, SINUMERIK control systems and components should only be connected to the company's network or the Internet if and to the extent necessary and with appropriate security measures (e.g. use of firewalls and network segmentation) in place.

The actions required in this regard are described in the following Configuration Manual: Industrial Security.

You can read about further actions in the application examples: Manage MyMachines – Installation in existing control environments.

NOTE

Parallel operation with SINUMERIK Integrate applications is not possible

NOTICE

Data misuse due to an unprotected Internet connection

An unrestricted Internet connection can lead to data misuse.

Before establishing a network connection, ensure your PC is exclusively connected to the Internet via a secure connection. Pay attention to the security-relevant notes.

Further information about communications security can be found in the Configuration Manual: Industrial Security.

NOTE

SINUMERIK control system security

The necessary security measures (e.g. virus scanner, firewalls, OS patching, etc.) must be implemented on the SINUMERIK control system.

Further information about communications security can be found in the Configuration Manual: Industrial Security.

NOTE

Operating PC security

The necessary security measures (e.g. virus scanner, firewalls, OS patching, etc.) must be implemented on the PCs which are used to visualize and configure Manage MyMachines at the OEM or end customer.

You will find further information on PCs in the industrial environment in the Configuration Manual: Industrial Security.

Delivery form

The updates and further information on the applications and products are stored on PridaNet and can be downloaded directly from there.

- OR -

You can contact your machine manufacturer.

- OR -

You can contact the Siemens Service & Support.

Additional references

Further information on the "SINUMERIK Operate" operating software can be found in the following reference:

  • SINUMERIK Operate Commissioning Manual (IM9)

  • SINUMERIK 828D Commissioning Manual, Commissioning CNC