Sequence

Overview

To use Analyze MyPerformance, you must perform various steps in MindSphere as well as at the SINUMERIK control system itself.

116739425035.png

Sequence

Proceed as follows:

In MindSphere:

  1. Create the required assets.
    Additional information is provided in Chapter: Asset Manager
    Detailed information is provided in the System Manual: MindSphere, Section: Asset Manager

  2. Create the "onboard.key".
    Additional information is provided in Chapter: Connecting the SINUMERIK control system with MindSphere

At the SINUMERIK control system:

  1. Check the installed versions.
    Additional information is provided in Chapter: Displaying version data

    • If an appropriate SINUMERIK Integrate version is not installed, then perform a client update.
      Additional information is provided in Chapter: Client update under Windows

  2. Activate the SINUMERIK Integrate client.
    Additional information is provided in Chapter: Activating the SINUMERIK Integrate client

  3. Enable the use of SINUMERIK Integrate.
    Additional information is provided in Chapter: Activating use of SINUMERIK Integrate

  4. Configure the URL and proxy

    - OR -

  5. Restart SINUMERIK Operate.

  6. Insert "onboard.key".

    - OR -

  7. Restart SINUMERIK Operate.

NOTE

File "onboard.key"

The file "onboard.key" contains safety-related information for the one-time connection setup of a SINUMERIK controller with MindSphere and must therefore be stored safely - both on the terminal, on which the file is stored temporarily, and on the target controller. Only when the connection between the SINUMERIK control system and MindSphere has been completely set up is this connection setup key no longer relevant.

This file is then automatically deleted on the SINUMERIK control system.

Secure the terminals used for this accordingly, for example, using virus protection programs, firewalls, OS updates, etc.