Activating the SINUMERIK Integrate client

Procedure

  1. Start the SINUMERIK Operate operating software on the control.

  2. Press the "Setup" and "Mach. data" softkeys.

  3. Press the "Password" softkey.

  4. The "Set password" window opens.

  5. Enter the password for "Manufacture" and press the "OK" softkey.

  6. Press the menu forward key and the "Display MD" softkey.

    • Set the machine data

      MD9108 $MM_SINUMERIK_INTEGRATE to "1".

    92666853003.png
  7. Press the <MENU SELECT> key followed by the menu forward key.

  8. The "SINUMERIK Integrate" softkey is displayed on the extended horizontal softkey bar.

    116116046091.png