Client update under Linux

Prerequisite

  • Emergency Boot System V04.70.05.00

  • SINUMERIK Operate 4.5 SP4
    - OR -

  • SINUMERIK Operate 4.7 SP2

Procedure

  1. Copy the "sinintclient.tgz" file to the USB flash drive.

  2. Insert the USB flash drive into the NCU.

  3. Start the NCU.

  4. In the menu, select "Update NCU Software and Data" with the cursor keys and press the "OK" softkey.

    76922903563.png
  5. In the menu, select "Update system software from USB memory stick" with the cursor keys and press the "OK" softkey.

    76922911499.png
  6. You receive a list with all tgz files.
    Select the current file.
    Press the "OK" softkey to confirm your selection.
    - OR -
    Press the shortcut key <Shift> + <F8> on the operator panel.

    76923277835.png
  7. The selected file is displayed.
    Press the "OK" softkey to confirm your selection.
    - OR -
    Press the shortcut key <Shift> + <F8> on the operator panel.

    76923452171.png
  8. A confirmation prompt appears.
    Press the "OK" softkey to confirm the confirmation prompt.
    - OR -
    Press the shortcut key <Shift> + <F7> on the operator panel.

    76923460107.png
  9. The installation is started.

    76923519243.png
  10. When the installation has been completed, the following message appears.
    Remove the USB flash drive.
    Select "Restart" from the menu and press the "OK" softkey.

    76923527179.png