Configure a SM1281 WAV Data Interface¶

The following steps will lead you through the process of configuring a SIPLUS SM1281 WAV Data Interface.

Requirements¶

• Prepared edge device within Edge Analytics:
  • Individual structure was created within the "Resources" section
  • Activated edge device

Procedure¶

To configure the data source, proceed as follows:

1. Open the "Edge Device" section and select the edge device.
   
2. Select "Resources" in the main selection.
   
   • The individual created structure within the navigation appears.
     
3. Select a folder within the navigation.
   
4. Click on the button to add a new Data Interface.
   
   • In the configuration area the available choice of Data Interfaces appears.
     
5. Select the Data Interface "SIPLUS SM1281 WAV".
   
   • In the configuration area the new edit window appears.
     
6. Enter a name and description in the "General" area.
   
7. In the area "Settings" add the following entries as needed:
   
   • Max number of different file readings
     
8. In the "Interface" area select the vibration data which shall be imported from the wave files.
   
   • Add individual name for the vibration data channels.
     
9. In order to save the configuration, click "Save".
   

Result¶

You have created a new configuration for a Dta Interface.

If you want to edit the configuration again, select the newly created entry in the selection list and click in the configuration area.