Skip to content

Overview of Rockwell protocol

The following image shows the data source input window for the Rockwell protocol:

Rockwell protocol

Rockwell data source parameter

In order to connect a Rockwell device, you need to select the Rockwell protocol and enter the following data source parameters:

Parameter Description
CPU type Shows available CPU types:
- COMPACT_LOGIX
- CONTROL_LOGIX
- MICRO_800
- OTHER_CPU
Currently not available:
- FLEX_LOGIX
- MICRO_LOGIX
- SOFT_LOGIX
- PLC5
- SLC500
Note: The CONTROL_LOGIX and MICRO_800 CPU types are supported from the version
MindConnect Nano/IoT2040 V03.04.02.06 b002.
IP address IP address of the Rockwell controller.
Route parameters Here you can define the routing path parameters - like rack, slot, node, and/or
ControlNet port numbers - needed to access the controller (default: 1,0).

Rockwell data point parameter

In order to collect the data of your Rockwell device, you must add new data points.

Rockwell data point

The following table shows the data point parameter:

Parameter Description
Data Type Data type supported by backend (e.g. INT).
STRING data type is currently not supported.
Tag Name of the tag that has to be recorded.

The following table shows the recommended data type selection:

Rockwell data type Length Data range¹⁾ MindSphere Data type
BOOL 1 bit 0 or 1 BOOLEAN
SINT 1 byte -128…+127 INT
INT 2 bytes -32,768…+32,767 INT
DINT 4 bytes -2,147,483,648…+2,147,483,647 INT
REAL 4 bytes - -3.40282347E38…-1.17549435E-38 (negative values) DOUBLE
- 0
- -1.17549435E-38-…3.40282347E38 (positive values)

¹⁾ Values have been taken from Logix 5000 Controllers I/O and Tag Data Programming Manual

Note

PCL data types

Currently only these PLC data types are supported.

Any questions left?

Ask the community


Except where otherwise noted, content on this site is licensed under the MindSphere Development License Agreement.


Last update: May 19, 2022