Configuring MCSA in Docker¶
The MCSA configuration will be automatically started during MCSA installation, but it can also be started manually by executing the “mcsa-config.sh” script with admin privileges in the MCSA installation folder.
It is mandatory to execute the MCSA installation with root privileges
- Either, directly as root, or
- By getting root rights using “su” command.
- "mcsa-config.sh" can be started using "sudo" command to execute it with root rights.
If the configuration script is not started as root, a message will be shown to start as root and the script will be terminated.
It is also necessary to start "mcsa-config.sh" script directly in the MCSA installation folder to make sure that the internally used files will be available during script execution.
After the installation, select the network adapters of the host system which are used by the MCSA containers as web and production interfaces, if the MCSA configuration is started for the first time.
These settings are necessary for the static network settings need to be applied via MindSphere asset manager UI.
- Be aware that MCSA containers directly use the Linux host's network interfaces and selecting web and production interfaces is only necessary for applying network interface settings via device configuration in MindSphere asset manager.
- If the Linux host is having further network interfaces, it might be possible that MCSA Docker containers will communicate with MindSphere and the data sources using these network interfaces.
- Therefore, it is recommended that only the host's network interface, which is selected as web interface provided with internet access.
To configure the MCSA in Docker, follow these steps:
In Web interface dialog, select web interface and click "OK".
It is mandatory to select Web interface.
In Production interface dialog, select production interface and click "OK".
MCSA configuration main menu¶
The MCSA configuration will display a menu to perform following tasks:
- Add new MCSA Docker container.
- Show informations of running MCSA Docker containers.
- Start exited/stopped MCSA Docker containers.
- Stop up/started MCSA Docker containers.
- Delete MCSA Docker containers.
You can select a task by using “Up/Down” keys and pressing “Enter” key and you can close the main menu by selecting "Exit" task.
Add new MCSA Docker container¶
For adding a new MCSA Docker container, provide the following values:
- Container name
- HTTP port
- MQTT port
- WinCC OA PMON port
- WinCC OA data port
- WinCC OA event port
- WinCC OA SNMP port
- Providing unique TCP ports for every MCSA Docker container is necessary because MCSA Docker containers run in host network mode of Docker.
- Therefore, after entering the TCP port number value it will be checked, if the port is already in use on the system.
- Although it is checked, if the entered port number is already in use, it is recommended to check the currently used ports of the already existing MCSA Docker containers beforehand, because it might be possible that the already used port is currently not active and therefore, it is not detected automatically.
- TCP port numbers should be entered in the allowed range (1 ... 65535).
- Because many ports are already standardized and used by other applications and protocols, port numbers in the upper number range is considered to be used.
- Information about already used and allowed port numbers can be found on following page: List of TCP and UDP port numbers.
During creation of the MCSA Docker container an "mcsa_1" postfix will be added to the name of the container automatically (example: c1_mcsa_1), it is not necessary to add "mcsa" to the name in this dialog.
MCSA Docker containers are running in host network mode, it is mandatory to define a system unique TCP port which will be used to access the local web server in the Docker container.
It is also necessary to define a unique MQTT port for every MCSA Docker container.
WinCC OA PMON port¶
In following dialog, the WinCC OA PMON port can be entered:
WinCC OA data port¶
In following dialog, the WinCC OA data port can be entered:
WinCC OA event port¶
In following dialog, the WinCC OA event port can be entered:
WinCC OA SNMP port¶
In following dialog, SNMP port for WinCC OA can be configured:
After all settings are entered and the confirmation to create the new MCSA container is given, then a new container will be created.
The main menu is displayed again after the new MCSA Docker container is created.
- After creation of an MCSA Docker container, the system will set up internally be which takes some time. Hence, it is recommended to wait for 2 minutes before trying to onboard the system, or to create another MCSA container.
- MCSA Docker containers will automatically be restarted after the system restart.
Show container info¶
In the main menu, select the "Show container info" task information will display about currently up/running MCSA container.
In the first dialog, the MCSA Docker container can be selected:
After selecting an MCSA container and click “OK”, following information is displayed:
Start Docker container¶
In the main menu, select the "Start containers" task to display a list of all exited/stopped MCSA Docker containers:
Select the containers to be started and click “OK” to start the containers.
The start progress is displayed by the following dialog:
After all the selected containers are started, the main menu is displayed again.
Stop Docker container¶
In the main menu, a list of all up/running MCSA Docker containers are displayed, after selecting the "Stop containers" task:
While stopping the containers, following dialog is displayed:
After all the selected containers are stopped, the main menu is displayed again.
Delete Docker container¶
In the main menu, MCSA Docker containers can be deleted after selecting the "Delete containers" task and select the containers to be deleted from the following dialog:
A dialog is displayed to confirm the containers to be deleted:
The deletion progress is displayed by following dialog:
After all the containers are deleted, the main menu is displayed again.
Any questions left?
Except where otherwise noted, content on this site is licensed under the MindSphere Development License Agreement.